Description
TM807A Cylinder Honing Machine is mainly used for maintaining the cylinder of the motorcycle, etc. Place the cylinder to be bored under the base plate or on the plane of the base of the machine after the center of the cylinder hole is determined, and the cylinder is fixed, maintenance of boring and honing can be carried out.
Specification
| Specification | TM807A |
|---|---|
| Lifting capacity | 4000kg |
| Lifting height | 1850mm |
| Min.height | 120mm |
| Pass width | 2500mm |
| Column width | 2790mm |
| Total width | 3320mm |
| Lifting time | 50s-60s |
| Motor power | 2.2kw-380v / 2.2kw-220v |
| Oil pressure rating | 24Mpa |
| Weight | 650kg |
Features
- Clear floor design, saves space.
- Adopt double cylinder, 4*4 higher and stronger chain, the wire rope balance system.
- One side manual release.
- Rubber pad door-opening protection.
- Secure fence protect the toes.
- Rubber support pad adopts double helix adjustment height and height increase joint.
- Limit switch.
Machine Pictures
